DreamFactory Hot Stamping Machine

Our product is the most innovative stamping machine in the history of leather craft, with over 3,000 units sold in over 80 countries. Its functionality and performance have been validated by our customers. Choose our product, and we promise it will become your best partner.

Made in korea

Product Description: The Dream Factory Hot Stamping Machine is a device that uses heat to emboss leather using a stamp made of metal such as brass. It can also add color to the embossed leather with the use of foil. The machine can also be used on other materials such as wood, paper, and suede. The head of the machine rotates and can precisely repeat the stamping process on the same location.

Full set components parts

Machine
Font holder
Stamp holder (Standard ver')
Clicker kit
Pricking iron jig

SUS PLATE and GUIDE BAR are also included as standard.

Product Features:

• The world's first stamping machine with a rotating head
• Can be used on various materials such as leather, wood, paper, and suede
• Can add color using foil
• Made of aluminum and stainless brass, with aluminum parts that have been hardened and anodized to increase strength
• Height adjustment is easy, even when using stamps of different heights
• Can use various holders for stamping work 
• Can perform hand clicker press work using the Clicker kit
• Can perform punching work using the Pricking iron Jig

Product Specifications:

• Material: Aluminum, stainless brass, etc.
• Size : 210*285*260mm
• Weight: Approximately 13kg
• Voltage: 110V or 220V
• Power: 400W

How to Use:

1. When stamping, it is important to adjust the height of the machine to match the material and stamp being used. The height adjustment is easy to perform, even when using stamps of different heights.

2. For optimal stamping results, make sure that all joints and parts of the machine are fully extended and properly aligned before starting the stamping process.

3. To add color with foil, place the foil on the material and apply the stamp. For best results, make sure the foil is firmly attached to the material. 

4. Place the material and stamp on the stamping area and press the head down to apply heat and stamp. Repeat the process as needed for your specific design.

5. Use the Clicker kit, Pricking iron Jig, or holder to perform various types of work.

Precautions:

1. Wear safety gloves and goggles when performing hot stamping work.

2. The stamped material may be damaged if exposed to water, oil, or dye. Be careful when handling the stamped material.

3. Always follow the manufacturer's instructions and safety guidelines when using the Dream Factory Hot Stamping Machine.

SUS PLATE and GUIDE BAR are also included as standard.

 ※Our company possesses information about the voltage and plug types for all countries. Unless otherwise specified, we will ship the product set to the voltage and plug type of the destination country. If you plan to use the product in a country other than the one you ordered from, or if you need a different specification, please contact us. 

Shipping :
We aim to ship all orders within 1-2 business days after receiving them, although the preparation of the products may be delayed in the event of low stock or if the order is combined with other products for shipment. Our shipping carrier is FedEx, although we may use other express shipping services depending on your location. Please note that shipping times may vary depending on where you are located and the specific shipping carrier being used.

※ According to FedEx policy, deliveries to PO Box addresses within the United States are not supported.
We would appreciate it if you could provide an alternative deliverable address, excluding PO Box addresses in the United States. 

※ If you want to purchase a single item, rather than a machine, please make your purchase on the "single item sales" page. Otherwise, the shipping cost may be higher than necessary.

※ Handmade products may have scratches due to the production process.

※ If your country is not on the shipping list, please contact me.

※ Shipping costs vary by country, and you can check the shipping cost at the checkout stage.

※ Taxes may be levied according to regulations in each country.

※ As the original developer of this product, I take great pride in its quality and unique features. Unfortunately, there are companies out there that have copied and are selling similar products. While imitation may be the sincerest form of flattery, it's important to know that only the original product has the level of craftsmanship and attention to detail that sets it apart. When you purchase from me, you can be sure that you're getting the real deal, backed by my commitment to providing exceptional customer service and a product that truly delivers on its promises. Thank you for choosing the original!